Home › Cities › MA › Monroe

Lead service lines in Monroe, MA

Search 30 service line records published by 1 water utility for Monroe.

Your address is matched in your browser and never sent to our server.

Service line status in Monroe

0Lead
0.0%
0Galvanized requiring replacement
0.0%
26Lead status unknown
86.7%
4Non-lead
13.3%

Counts are records in the utilities' published inventories (not people or buildings). One property can have more than one service line record.

PFAS in Monroe drinking water

Monroe Water District: no PFAS data was found for this water system (PWSID MA1190000) in EPA's UCMR 5 results.

Source: EPA UCMR 5 final occurrence data (EPA page last updated 2026-08-28; samples collected January 2023 – December 2025) ↗. All PFAS results nationwide →

Flood insurance claim history in Monroe

FEMA's NFIP claims data lists no flood insurance claims for the NFIP community “MONROE, TOWN OF” (community ID 250351) since 1978.

Historical statistics only. Counts cover claims filed under National Flood Insurance Program policies for properties in the NFIP community “MONROE, TOWN OF” (community ID 250351); they do not include uninsured damage or private flood insurance, and FEMA's data does not identify individual properties. Paid amounts are FEMA's building, contents and Increased Cost of Compliance payments as reported, not adjusted for inflation. This site is not an insurance agent, broker or advisor, and this is not a flood zone determination. For official flood maps, see the FEMA Flood Map Service Center.

Sources: Federal Emergency Management Agency (FEMA), OpenFEMA Dataset: NFIP Redacted Claims - v3 (API endpoint; data refresh 2026-09-09), retrieved 2026-10-08; OpenFEMA Dataset: NFIP Community Status Book - v1 (API endpoint), retrieved 2026-10-08. Used under the OpenFEMA terms and conditions.

This product uses the Federal Emergency Management Agency's OpenFEMA API, but is not endorsed by FEMA. The Federal Government or FEMA cannot vouch for the data or analyses derived from these data after the data have been retrieved from the Agency's website(s).

Data sources

What to do next

  1. Confirm with your utility. Inventories change as lines are inspected and replaced. The utility's official map and customer service line are the authoritative source.
  2. If your status is unknown, many utilities ask customers to report what they see where the water pipe enters the building. EPA's Protect Your Tap guide explains how to check.
  3. Consider testing. EPA: “Since you cannot see, taste, or smell lead dissolved in water, testing is the only sure way of telling whether there are harmful quantities of lead in your drinking water.” Your utility or state health department can point you to certified laboratories.
  4. Use cold water. EPA: “Use only cold water for drinking, cooking and making baby formula. Remember, boiling water does not remove lead from water.”
  5. Filters. EPA: “If you use a filter, make sure you use a filter certified to remove lead.” See EPA's consumer tool for filters certified to reduce lead.
Disclaimer: Information is copied from the utility's published service line inventory and may be incomplete, out of date, or contain errors. It is not a substitute for water testing and does not describe interior plumbing. Contact your water utility for the official status of your service line. Health information is limited to quotations from EPA and CDC.